Merino Long Sleeve Baselayer
-
Durable
The key to staying comfortable on cold days is staying dry. We used a construction method called plating to place recycled polyester technical fibers next to skin on our responsibly sourced Merino wool, long-sleeve base layer. By putting polyester next to the rider’s skin, it transports moisture away to the Merino layer where it can evaporate even as the wool acts as insulation. The base layer uses a set-in sleeve design for a versatile form-following fit to make layering easy.
The key to staying comfortable on cold days is staying dry. We used a construction method called plating to place recycled polyester technical fibers next to skin on our responsibly sourced Merino wool, long-sleeve base layer. By putting polyester next to the rider’s skin, it transports moisture away to the Merino layer where it can evaporate even as the wool acts as insulation. The base layer uses a set-in sleeve design for a versatile form-following fit to make layering easy.
- Tissu plaqué unique qui place le polyester près de la peau et la laine de mérinos à l’extérieur pour un transfert d’humidité et une régulation thermique supérieurs
- Transfer Merino fabric combines wool and recycled polyester for sustainable technical performance
- Unique plated fabric construction places polyester next to skin and merino on the exterior for superior moisture transfer and thermal regulation
- Fait de laine mérinos fine de 18,5 microns pour un confort supérieur
- Made using fine 18.5-micron merino wool for superior comfort
- Fibres techniques de polyester recyclé RepreveMD XS provenant de bouteilles d’eau en plastique recyclées
- Recycled Repreve® XS Polyester technical fibers are made from recycled plastic water bottles
- Manches montées pour un ajustement polyvalent qui facilite les superpositions
- Set in sleeve construction for easy layering and versatility
- Tag is located on outside of garment
58% recycled polyester, 42% merino wool Made in Vietnam
Type: Transfer
Réflectivité:; Low-light visibility
USE SIMPLE DETERGENTS WITH NO ADDITIVES Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants. READ THE CONTENT CARE LABEL: On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves YOU CAN USE THE DRYER, CAREFULLY: If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry.